Amerec DSNR-Trend45
Designer Trend 4.5KW Sauna Heater, Amerec
The Amerec Designer Trend 45 4.5 kW electric sauna heater is engineered to power sauna rooms up to 210 adjusted cubic feet (ACF).
- Wall-mounted
- Stainless steel construction
- Industrial grade, serviceable heating elements
- Operates with A30 Control
- Exceptionally large rock capacity
- Direct rock-to-heating element contact
- UL listed
- 26"H x 20"W x 14"D
- For sauna rooms from 100 to 210 adj. cu. ft.
- 33 lbs. of Vulcanite sauna stones
- Installation Manual
- Limited Warranty
| Model | Designer Trend 45 |
|---|---|
| Shipping Weight | 85 lbs |
| Minimum Adjusted Cubic Feet | 100 |
| Maximum Adjusted Cubic Feet | 210 |
| Kilowatt Rating | 4.5 KW |
| Voltage | 240V |
| Phase | 1PH |
| Nominal Amps | 18.8 Amps |
| Width | 20" |
| Depth | 14" |
| Height | 26" |
Amerec's A30 Control Panel is a simple and convenient solution for complete control of your sauna heater and lighting.
Sauna Heater Rocks, Bathology
The secret to successful sauna bathing has always been the rocks.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 321 Sauna Room Temperature Sensor Guard.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 311 Sauna Room Temperature Sensor Guard.
A cleaner specially formulated for wood saunas!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your home sauna.
A cleaner specially formulated for wood saunas!
This powerful disinfectant cleaner kills Mold, mildew and odor-causing fungi on contact.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.