Amerec Octa-120
Octa Series 12.0KW Sauna Heater, Amerec
Amerec Sauna Heaters...the most requested name in sauna bathing!
- Floor standing
- Stainless steel construction
- Industrial grade, serviceable heating elements
- Operates with SC or DIGI VII Series Control and appropriate CB Series Contactor
- Exceptionally large rock capacity
- Direct rock-to-heating element contact
- 35”H x 22”W x 22”D
- For sauna rooms from 510 to 740 adj. cu. ft.
- 132 lbs of Olivine sauna stones
- Installation Manual
- Limited Warranty
| Model | Octa-120 |
|---|---|
| Shipping Weight | 215 lbs |
| Minimum Adjusted Cubic Feet | 510 |
| Maximum Adjusted Cubic Feet | 740 |
| Kilowatt Rating | 12.0 KW |
| Width | 22" |
| Depth | 22" |
| Height | 35" |
The Amerec SC-60 is a wall-mounted, dial time and temperature control to monitor your bathing environment.
The Amerec SC-Club is a wall-mounted, ON/OFF switch intended for commercial applications where an attendant is present.
The Amerec SC-9 control panel is a wall-mounted, dial time and temperature control which monitors the bathing environment.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 311 Sauna Room Temperature Sensor Guard.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 321 Sauna Room Temperature Sensor Guard.
Sauna Heater Rocks, Bathology
The secret to successful sauna bathing has always been the rocks.
A cleaner specially formulated for wood saunas!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your home sauna.
A cleaner specially formulated for wood saunas!
This powerful disinfectant cleaner kills Mold, mildew and odor-causing fungi on contact.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.