Amerec Pro-105
Pro Series 10.5KW Sauna Heater, Amerec
The Amerec Pro-105 10.5 kW sauna heater is engineered to heat sauna rooms up to 600 adjusted cubic feet (ACF).
- Floor standing
- Stainless steel construction
- Industrial grade, serviceable heating elements
- Operates with SC or DIGI VII Series control and appropriate CB Series contactor
- Exceptionally large rock capacity
- Direct rock-to-heating element contact
- UL listed
- 29”H x 20”W x 19”D
- For sauna rooms from 390 to 600 adj. cu. ft.
- 132 lbs of Olivine sauna stones
- Installation and operation manual
- Limited warranty
| Model | Pro-105 |
|---|---|
| Shipping Weight | 215 lbs |
| Minimum Adjusted Cubic Feet | 390 |
| Maximum Adjusted Cubic Feet | 600 |
| Kilowatt Rating | 10.5 KW |
| Electrical Data by Voltage/Phase Selected | Heater Electrical Chart |
| Width | 20" |
| Depth | 19" |
| Height | 29" |
The Amerec SC-Club is a wall-mounted, ON/OFF switch intended for commercial applications where an attendant is present.
The Amerec SC-9 control panel is a wall-mounted, dial time and temperature control which monitors the bathing environment.
The Amerec SC-60 is a wall-mounted, dial time and temperature control to monitor your bathing environment.
Sauna Heater Rocks, Bathology
The secret to successful sauna bathing has always been the rocks.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 321 Sauna Room Temperature Sensor Guard.
A sauna sensor tampering cure…by Bathology!
Expect consistent and reproducible sauna heater operation with the RB 311 Sauna Room Temperature Sensor Guard.
A cleaner specially formulated for wood saunas!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your home sauna.
A cleaner specially formulated for wood saunas!
This powerful disinfectant cleaner kills Mold, mildew and odor-causing fungi on contact.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.
Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.