AX Series 11KW Steam Shower Generator, Amerec
AX Series 11.2KW Steam Shower Generator, Amerec
Model
AX11
The Amerec AX11 steam bath generator from the AX Series boasts a 11.2 kilowatt power rating and is made for home steam baths with dimensions between 175 to 375 adjusted cubic feet.
- Warm Start feature standard
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Exterior plug-in jacks allow quick and easy connection of control and sensor
- Low voltage safety control circuits
- Electrical can be wired for 1 or 3 phase in the field
- Available Auto Drain automatic draining system
- Optional tandem operation for room size greater than 550 cu ft (requires purchase of a tandem cable)
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- Steam bath generator
- Control Cable 50' 4-wire CAt5
- Sensor cable 50' 2-conductor
- Installation and operation manual
- Limited warranty
Model | AX11 |
---|---|
Minimum Adjusted Cubic Feet | 175 |
Maximum Adjusted Cubic Feet | 375 |
Shipping Weight | 32 lbs |
Electrical | 240V/1PH | 240V/3PH | 208V/1PH | 208V/3PH |
---|---|---|---|---|
Kilowatt Rating | 11.00 KW | 11.00 KW | 11.24 KW | 11.24 KW |
AC Voltage | 240V AC | 240V AC | 208V AC | 208V AC |
DC Voltage | 5V DC | 5V DC | 5V DC | 5V DC |
Phase | 1PH | 3PH | 1PH | 3PH |
Nominal Amperage | 46 Amps | 26 Amps | 2 Circuits, 18 and 36 Amps Respectively | 31 Amps |
Recommended Protective Device | 60 Amp | 40 Amp | 2 Circuits, 30 and 50 Amps Respectively | 40 Amp |
Water Supply Connection | 3/8" NPT |
---|---|
Generator Steam Line Connection | 1/2" NPT |
Steam Head Connection | 1/2" NPT |
Drain Connection | 3/4" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve | 10 PSIG |
Control "Rough-In" Cut-Out | 2-3/8" Diameter |
Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 7/8" Diameter |
Generator Control Connection | 8 Pin, Snap-In Connector |
Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
Width | 16-1/2" |
Depth | 6-1/4" |
Height | 15" |