Amerec AX14
Amerec AX14
AX Series 14.1KW Steam Bath Generator
AX Series 14.1KW Steam Bath Generator
Model
AX14
The Amerec AX14 steam bath generator from the AX Series boasts a 14.1 kilowatt power rating and is made for home steam baths with dimensions between 350 to 550 adjusted cubic feet.
- Warm Start feature standard
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Electrical can be wired for 1-phase or 3-phase in the field
- Available Auto Drain automatic draining system
- Optional tandem operation for room size greater than 550 cu ft (requires purchase of a tandem cable)
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- Steam bath generator
- Control Cable 50' 4-wire CAt5
- Sensor cable 50' 2-conductor
- Installation and operation manual
- Limited warranty
| Model | AX14 |
|---|---|
| Minimum Adjusted Cubic Feet | 350 |
| Maximum Adjusted Cubic Feet | 550 |
| Shipping Weight | 32 lbs |
| Electrical | 240V/1PH | 240V/3PH | 208V/1PH | 208V/3PH |
|---|---|---|---|---|
| Kilowatt Rating | 14.00 KW | 14.00 KW | 13.58 KW | 13.58 KW |
| AC Voltage | 240V AC | 240V AC | 208V AC | 208V AC |
| DC Voltage | 5V DC | 5V DC | 5V DC | 5V DC |
| Phase | 1PH | 3PH | 1PH | 3PH |
| Nominal Amperage | 2 Circuits, 21 and 38 Amps Respectively | 34 Amps | 2 Circuits, 24 and 42 Amps Respectively | 38 Amps |
| Recommended Protective Device | 2 Circuits, 30 and 50 Amps Respectively | 50 Amp | 2 Circuits, 30 and 50 Amps Respectively | 50 Amps |
| Water Supply Connection | 3/8" NPT |
|---|---|
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve | 10 PSIG |
| Control "Rough-In" Cut-Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough-In" Cut-Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width | 16-1/2" |
| Depth | 6-1/4" |
| Height | 15" |

