Amerec ES7
Amerec ES7
EasySteam Builder Series 7.0KW Steam Bath Generator, Amerec
EasySteam Builder Series 7.0KW Steam Bath Generator, Amerec
Model
ES7
Control Included! The Amerec ES7 steam bath generator from the ES Builder Series boasts a 7 kilowatt power rating and is made for home steam baths with dimensions between 100 to 220 adjusted cubic feet.
- For steam bath enclosures up to 220 adjusted cubic feet
- Available in 240V/1PH operation
- Electrical can be wired for 1-phase or 3-phase in the field
- Stainless steel tank
- Industrial grade, serviceable heating element
- Modular "snap-in" control connections
- Durable electronic components
- Electronic water-level control system
- Low-voltage safety control circuits
- Optional ADK Automatic Drain system
- Full port drain valve
- ASME safety valve
- UL/CSA/CE listed
R30K Control
- Power indicator light
- 30-Minute time cycle
- Available in Polished Chrome
- On/off control
- Easy-to-use, press on timer
Swipe horizontally to reveal full table content.
| Model | ES7 |
|---|---|
| Minimum Adjusted Cubic Feet | 100 |
| Maximum Adjusted Cubic Feet | 220 |
| Kilowatt Rating | 7 KW |
| Shipping Weight | 27 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 29 Amps |
| Recommended Protective Device | 40 Amp |
| Recommended Minimum Copper Wire Supply | 8 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 1/2" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve | 10 PSIG |
| Control "Rough-In" Cut-Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width | 16-1/2" |
| Depth | 6-1/4" |
| Height | 13" |